Certificates and support
E
E.1 Certificates
You can find certificates on the Internet at Industry online support portal (http://
www.siemens.com/processinstrumentation/certificates) or on an included DVD.
Certification documents including calibration report are supplied with each sensor included on
the SensorFlash. Material, pressure test, and factory conformance certificates are optional at
ordering.
Note
EAC declaration
The EAC declaration is available on the SensorFlash SD card delivered with the device.
E.2 QR code label
A QR code label can be found on the device. With the use of a smart phone, the QR code
provides a direct link to a website with information specific to the device, such as manuals,
FAQs, certificates, etc.
E.3 Technical support
Technical support
If this documentation does not provide complete answers to any technical questions you may
have, contact Technical Support at:
● Support request (http://www.siemens.com/automation/support-request)
● More information about our Technical Support is available at
Technical Support (http://www.siemens.com/automation/csi/service)
Internet Service & Support
In addition to our documentation, Siemens provides a comprehensive support solution at:
● Service & Support (http://www.siemens.com/automation/service&support)
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB 275
To Next Page
Loading...
