In thealarm list (level 2) it is possible to select any of the active alarms. Press or to scroll
through the alarm list. Press to access detailed information of the highlighted alarm (level 3).
Alarm List (level 3)
① ID Alarm identification number.
② Diagnostic Describes possible causes.
③ Coming Time stamp for alarm occurrence.
④ Action Describes corrective action.
In the detailed alarm information view (level 3) the diagnostic and action texts are displayed.
Press to exit the detailed information view.
Alarm acknowledgement
There are two ways to have the alarms removed from the alarm list.
● Manual: The alarm remains in the alarm list until the alarm is manually acknowledged (ack.).
The time of the acknowledgement is shown in the history log.
● Auto: The alarm is removed from the alarm list when the cause is removed (going)
Operating
7.1 Local operation (HMI)
SITRANS FC330
116 Operating Instructions, 01/2019, A5E44030648-AB
To Next Page
Loading...
