Siemens SITRANS FC330 - Page 173

ID Icons Message Cause/Action
49 Malfunction in Pickup Am‐
plitude
Contact your local Siemens representative.
50 Malfunction in Pickup Am‐
plitude
Contact your local Siemens representative.
55 Malfunction in sensor driv‐
er
Contact your local Siemens representative.
56 Malfunction in sensor driv‐
er
Contact your local Siemens representative.
57 Malfunction in sensor driv‐
er
Contact your local Siemens representative.
58 Unstable driver oscillation Contact your local Siemens representative.
59 Mass flow out of specifica‐
tion
Reduce the flow. If the problem persists, contact your local
Siemens representative.
60 Volume flow out of speci‐
fication
Reduce the flow. If the problem persists, contact your local
Siemens representative.
61 Density out of specifica‐
tion
Contact your local Siemens representative.
Diagnostics and troubleshooting
10.2 Fault codes and corrective actions
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB 173