Level 3 Level 4 Level 5
No. Name No. Name No. Name
4.3 Modbus (Channel 1)
4.3.1 Slave address (SW)
4.3.2 Slave address (HW)
4.3.3 Change Modbus settings
4.3.4 Data rate
4.3.5 Parity and stopbits
4.3.6 Floating point byte order
4.3.7 Integer byte order
4.3.8 Register mapping
4.3.9 Modbus units
4.3.9.1 Mass flow units
4.3.9.2 Volume flow units comms
4.3.9.3 Standard volume flow
units comms
4.3.9.4 Fraction units
4.3.9.5 Fraction units
4.3.9.8 Density units
4.2.9.9 Kinematic viscosity units
4.3.9.10 Pressure units
4.3.9.11 Temperature units
4.3.9.12 Totalizer 1 units
4.3.9.12 Totalizer 1 units
4.3.9.12 Totalizer 1 units
4.3.9.13 Totalizer 2 units
4.3.9.13 Totalizer 2 units
4.3.9.13 Totalizer 2 units
4.3.9.14 Totalizer 3 units
4.3.9.14 Totalizer 3 units
4.3.9.14 Totalizer 3 units
4.3.10 Damping
4.3.10.1 Damping value
4.3.10.2 Process values
4.4 PROFIBUS DP/PA
4.4.1 Slave address
4.4.2 Configuration flag ac‐
knowledge mode
4.4.3 GSD (General Station
Description)
4.4.4 Active GSD (General Sta‐
tion Description)
* = only visible with ordering option S30. Not available for US customers.
HMI menu structure
C.21 Menu item 4: Communication
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB 269
To Next Page
Loading...
