Mounting on pipe
1. Mount mounting bracket on pipe using fastening brackets/U-bolts.
Note
U-bolts and other miscellaneous hardware are not supplied with the flowmeter.
2. Tighten nuts (torque: 10 Nm).
Mounting in front panel
1. Cut out a hole in panel as shown.
Figure 4-1 Panel cut-out dimensions
2. Remove lid from transmitter wall mount housing.
Installing/mounting
4.2 Installation instructions
SITRANS FC330
44 Operating Instructions, 01/2019, A5E44030648-AB
To Next Page
Loading...
