Siemens SITRANS Series - Page 110









3EDU
Example
For the level measurement, you set the following values, for example:
Damping value: 2.0 s
Lower range value: 0.0 bar
Upper range value: 5.0 bar
Application: Level (LEVEL)
Unit: m
Lower scaling point: 0.0 m
Upper scaling point: 49 m
Parameter assignment
9.2 Parameter assignment over device with display
SITRANS P320/P420 (mA/HART)
110 Operating Instructions, 06/2018, A5E44852162-AA