Procedure
1. Navigate into the parameter view.
Navigating in the views (Page 71)
2. Select the parameter "User PIN" [27].
3. Use the
button to confirm.
The message "USER PIN ON" (User PIN enabled) appears for 2 seconds.
Result
The user PIN is enabled.
9.2.25.2 Disable user PIN
Requirement
The user PIN is enabled.
Procedure
1. Navigate into the parameter view.
Navigating in the views (Page 71)
2. Select the parameter "User PIN" [27].
3. Use the
button to confirm.
4. Select YES with the or button.
5. Use the button to confirm.
The message "USER PIN OFF" appears for 2 seconds.
Parameter assignment
9.2 Parameter assignment over device with display
SITRANS P320/P420 (mA/HART)
Operating Instructions, 06/2018, A5E44852162-AA 135
To Next Page
Loading...
