5. Enter the new user PIN with a value between 1 and 65535.
Changing parameter values (Page 77)
6. Use the button to confirm.
7. Repeat the new user PIN and use the button to confirm.
Result
● If both user PINs match, the "COMPL" message appears.
The user PIN has been successfully changed.
● If the two user PINs do not match, the "FAILD" message appears.
Then repeat the described procedure.
9.2.23 Recovery ID [25]
Shows the recovery ID.
If you have forgotten your user PIN, you will need a recovery ID. The "Recovery ID" parameter
shows a number that is necessary for restoring the user PIN.
Figure 9-2 Example
9.2.23.1 Display Recovery ID
Requirements
The "User PIN" parameter [27] is enabled.
Parameter assignment
9.2 Parameter assignment over device with display
SITRANS P320/P420 (mA/HART)
132 Operating Instructions, 06/2018, A5E44852162-AA
To Next Page
Loading...
