Siemens SITRANS Series - 7.2 Operating the device with display; 7.2.1 Display

7.2 Operating the device with display
7.2.1 Display
This display has three different views.
● Measurement view
● Parameter view
● Edit view









① Display of:
● Name and unit of measured values (Measurement view)
● Name and unit of parameters (Parameter view, Edit view)
② Specifies whether there are previous parameters or subsequent parameters.
③ Display of:
● Measured value number
● Parameter number
● ID of the messages ⑦
④ Device is write-protected.
⑤ Device in the parameter view: When you press the button in the parameter view, the parameter
can be edited and the "EDIT" symbol flashes.
⑥ Functional Safety is enabled.
⑦ The ID ③ and the displayed "INFO" symbol serve to identify the diagnostic message.
For the IDs of the messages and their meaning, refer to the section "Diagnostics and troubleshoot‐
ing (Page 181)".
⑧ NE 107 symbols. For a description and priority, refer to the section "Diagnostics and troubleshoot‐
ing (Page 181)".
⑨ Bar graph display for measured values or progress indicator in wizards
⑩ Main line; 5-digit display of measured values and parameter values.
⑪ Sign of the measured value.
Operating
7.2 Operating the device with display
SITRANS P320/P420 (mA/HART)
70 Operating Instructions, 06/2018, A5E44852162-AA