Siemens SITRANS Series - 9.2.16.1 Set lower scaling point

Level
Setting range: Freely selectable numeric value
Factory setting: 0 m
Volume
Setting range: Freely selectable numeric value
Factory setting: 0 m
3
Volume flow
Setting range: Freely selectable numeric value
Factory setting: 0 m
3
/s
Setting range: Freely selectable numeric value
Factory setting: 0
Mass flow
Setting range: Freely selectable numeric value
Factory setting: 0 kg/s
Setting range: Freely selectable numeric value
Factory setting: 0
Custom units
Setting range: Freely selectable numeric value
Factory setting: USER DEFINED (custom), or as specified in order
Note
Bidirectional volume and mass flow measurement
Select a lower scaling value that is symmetrical to the upper scaling value. Example:
● Upper scaling value: 1000 m
3
/s
● Lower scaling value: -1000 m
3
/s
9.2.16.1 Set lower scaling point
Procedure
1. Navigate to the parameter view.
Navigating in the views (Page 71)
2. Select the "Lower scaling point" parameter [18].
3. Use the button to confirm.
4. Set the lower scaling point.
Parameter assignment
9.2 Parameter assignment over device with display
SITRANS P320/P420 (mA/HART)
Operating Instructions, 06/2018, A5E44852162-AA 127