0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
Scan Unit (Gantry) System Description
B.2-10
B
.2
B
Press one key for motion control only at a time.
B.2
The operating elements illustrated on the left margin in follow-
ing pages are from right gantry panel. You can use the operat-
ing elements on the left gantry panel as well.
B.2
Gantry tilt
B.2
B.2
With the two buttons, you can tilt the gantry up to +/- 30° from
the vertical position (0°) depending on the table height.
B.2
Table movements
B.2
B.2
With the four table adjustment buttons, you can adjust the table
height and move the table into and out of the gantry.
B.2
To Next Page
Loading...
