System Description Scan Unit (Gantry)
0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
B.2-11
0.0
Predefined table position
B.2
B.2
With the buttons A and B you can move the table to two prede-
fined positions. These positions can be configured by the Sie-
mens Service technician .
B.2
Laser light marker
B.2
B.2
With this key, you switch the laser light marker on and off. The
laser light marker indicates the position of the scan center and
the slice plane in the middle of the detector rows.
B.2
i
.2
B
After approx. 1 minute, the laser light marker is switched off
automatically.
B.2
To Next Page
Loading...
