Siemens SOMATOM Emotion syngo CT 2007E - Page 446

0.0
syngo CT 2007E Emotion Operator Manual
02/2008 0.0
General Information Quality Assurance
F.1-4
i .1 F
The phantom holder is secured by a locking button in the recep-
tacle on the underside of the patient table. You must press this
button in when you pull the holder out of the guide again after
removing the phantom set. F.1
Positioning the phantoms F.1
F.1
✧ Set the gantry vertical (0°).
F.1
✧ Activate the light marker.
F.1
✧ Set the appropriate table height using the light marker.