Quality Assurance Daily Quality Measurements
0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
F.2-3
0.0
Preparing the quality measure-
ment
F.2
You must perform calibration before you start quality measure-
ment.
F.2
✧ Call up Setup > Calibration. (→ Page D.1-8 System
checkup and calibration)
✧ Position the phantom set. (→ Page F.1-1 General Informa-
tion)
B
.2
F
All parameters and images shown in this manual are examples.
Only the parameters displayed by your system are definite.
F.2
To Next Page
Loading...
