Siemens SOMATOM Emotion syngo CT 2007E - Page 510

0.0
syngo CT 2007E Emotion Operator Manual
02/2008 0.0
Low Contrast Test (Optional) Quality Assurance
F.5-4
✧ Move the table until the inner light marker points on the
reference marking on the slice thickness phantom.
F.5
F.5
✧ Start the low contrast test with Go.
You are prompted to press Start.
F.5
F.5
F.5
✧ Press the Start key on the control box.
The phantom position and the gantry inclination are checked.
F.5