0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
Mechanical Safety Safety
A.3-10
Limitation of liability
A. 3
As the manufacturer, assembler, installer or importer of the sys-
tem, Siemens does not accept liability for the safety functions,
reliability or performance of the system, if one of the following
circumstances applies:
A.3
❏ Installation, upgrade, readjustment, modification, repair or
upgrading by persons not authorized to do so by Siemens.
❏ Components not properly replaced by the original parts
from Siemens.
❏ Electrical installation in the CT room that does not comply
with the requirements of VDE standard 0107 or other bind-
ing codes of practice.
❏ Operation of the system in a way which deviates from the
instructions given in these manuals.
Certificate of conformity
A. 3
We therefore recommend that you obtain a certificate of con-
formity containing the following information:
A.3
❏ Type, extent and date of the work performed on the sys-
tem.
❏ Names of all those involved in the work (and their compa-
nies)
❏ Their signatures.
B
.3
A
Please note that this does not imply that the repairs are author-
ized. Siemens does not accept liability for repairs that are car-
ried out without our written permission.
A.3
To Next Page
Loading...
