Safety Mechanical Safety
0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
A.3-11
0.0
Equipment of other manufac-
turers
A. 3
If you are planning to install equipment of other manufacturers,
you must obtain information about potential dangers in con-
necting or using systems or equipment of other manufacturers.
This information can be drawn from the system specification.
A.3
If this information is not sufficient, you must consult the manu-
facturer of such systems/equipment or a specialist about the fol-
lowing topics:
A.3
❏ Reliability and performance of the systems/equipment
❏ Potential safety risks for people and equipment
✧ If you connect additional equipment, you have to ensure
the configuration complies with standards and statutory
regulations (e.g. IEC/EN 60601-1-1).
✧ Please contact your Siemens representative for more infor-
mation.
To Next Page
Loading...
