SDS1000X-E&SDS1000X-U User Manual
161
Set the save type to CSV, and set the Para Save option to On or Off to turn on or of
the parameters storage function.
8. Matlab
The oscilloscope saves the waveform data in external memory in “*.DAT” format.
The data of all the channels turned on can be saved in the same file. The recall of
Matlab file is not supported.
9. To Default Key
The oscilloscope saves the factory config and user set config. Then you can select
the default function is the factory config or user set config.
10. Bin2CSV Tool
Download the tool and run it after decompressing on PC. The bin file of waveform
data can be converted into a visual CSV file.
To Next Page
Loading...
