SDS1000X-E&SDS1000X-U User Manual
5
Prepare for Using
Adjust the Supporting Legs
Adjust the supporting legs properly to use them as stands to tilt the oscilloscope
upwards for stable placement of the oscilloscope as well as better operation and
observation.
Figure 5 Adjust the Supporting Legs
Connect the Power Supply
The power requirements of the oscilloscope are 100-240 V, 50/60Hz or 100-120 V,
400Hz. Please use the power cord supplied with the accessories to connect the
oscilloscope to the power source.
To Next Page
Loading...
