Simrad AI80 - Page 32

Simrad AI80 User Manual
22 Man_user_AI80_r2
- Region 2 ----------
ChnA: 2087
ChnB: 2088
RxTx: TxA/TxB, RxA/Rx▼
TxPower: LOW
LAT NE: 64°00'00.00N
LON NE: 011°00'00.00E
LAT SW: 00°00'00.00N
LON SW: 000°00'00.00E
BW A: Default
BW B: Default
Zone: 0
Hold [OK] to save
Region
In this page the selected region is displayed. This
page is read only and shows each region's
parameters.
- Add region ---------
ChnA: 0
ChnB: 0
RxTx: TxA/TxB, RxA/Rx▼
TxPower: LOW
LAT NE: 00°00'00.00N
LON NE: 000°00'00.00E
LAT SW: 00°00'00.00N
LON SW: 000°00'00.00E
BW A: Default
BW B: Default
Zone: 0
Hold [OK] to save
Add region
In this page the user can add a region manually.
Refer chapter 3.6.
- Default Values ----
ChnA: 0
ChnB: 0
TxPower: HIGH ▼
BW A: Default
BW B: Default
Hold [OK] to save
Edit Current region
In this page the user can edit current region settings.
Select parameter with
UP/DOWN, press EDIT to start
editing and
OK when finished. Hold OK button to save
changes to region. If the user presses
CANCEL, he is
informed that cancelling will delete his entered region.
If the region entered is not a valid region, the user is
notified about this through a dialogue box.