Appendix B - Software setup using optional MKD
Man_user_AI80_r2 61
6 APPENDIX B - SOFTWARE SETUP
USING OPTIONAL MKD
6.1 Security settings optional MKD
To avoid unauthorised input of data in the menus accessed from the
Main menu, the AI80 system should be set up with security codes and
different access levels.
3 different access levels may be defined:
Level 0: No security code required
Level 1: Access controlled by L1 PIN Code or L2 PIN Code
Level 2: Access controlled by L2 PIN Code
Access levels for the different menus are defined in the Security
submenu, activated from the Menu page.
Setting the security codes
When using the external, optional MKD the default security code
delivered with the Mobile Unit is “AIS” as for both Level 1 and Level
2. These security codes should be changed when the system is
configured for the first time. Use the following procedure to change
the security codes:
=== Main Menu ======== P1
c.Security
1. Press the MENU button to activate the Main
menu, and select Security. The Security
menu will be displayed.
=== Security ======== P1c
Authorisation
-------------------------
L1 PIN Code :********
L2 PIN Code :********
Nav.Status :1
Voyage Data :2
Static Data :0
Chn.Mgmt :0
VHF Link :1
Serial Ports :1
Netw.Settings :2
Answer Mode :0
To Next Page
Loading...
Need help?
General
