Appendix B - Software setup using optional MKD
Man_user_AI80_r2 63
=== Security ======== P1c
Authorisation
-------------------------
L1 PIN Code :********
L2 PIN Code :********
Nav.Status :0
Voyage Data :0
Static Data :1
Chn.Mgmt :2
VHF Link :1
Serial Ports :1
Netw.Settings :2
Answer Mode :1
2. Highlight the parameter group for which the
security level is to be changed, and press the
ENTER button. The lower part of the display
will now show the keyboard function.
3. Enter the security code for Level 2, move the
highlight to the symbol and press the
ENTER button. In the lower part of the display
it will now be possible to change security level
for the selected parameter.
=========================
012
4. Select security level, and confirm by highlighting the symbol
and pressing the ENTER button.
5. Continue entering security levels for the remaining parameter
groups.
Note ! To ease the operation of the system, all parameters that have to be
changed during normal operation should be set to Level 0.
Note ! Once authenticated with L1 or L2 PIN code, the authentication is
valid until the View page has been displayed for 5 seconds. To protect
the AI80 security systems, the MKD returns to the View page when not
used for 15 minutes. In high security applications we recommend
manually returning to the View page when a change that required
authentication is completed.
To Next Page
Loading...
Need help?
General
