MANAGING THE CHART DATABASE
20221859 / F 111
Position fix points
The operator may manually place a position fix point, with a
corresponding time label in the chart display.
The dialog for setting up a manual position fix point is accessed
by tapping the Tools menu followed by Mariner Objects and
Position Fix commands.
The time when the position fix is drawn may be set manually in
the dialog.
The position fix point may now be set by moving the cursor to
selected position and pressing the left cursor key. Latitude and
longitude fields in the dialog will change to indicate accurate
position for the point.
A position fix point is removed from the chart by moving the
cursor to the symbol and pressing the right cursor key.
All position fix points are removed from the chart by tapping
Remove All.
To Next Page
Loading...
