Simrad CS66
32 20221859 / F
Registering the database
The chart databases installed from factory are displayed in the
Registered databases field. If a new database is to be installed
use the following procedure:
1 Activate the Databases tab in the C-MAP
Chart Manager
2 Press Register manually, and locate the
folder including the chart database
3 Follow any instruction on the screen to
complete the installation.
When completed the chart databases will be listed
in the Registered databases field.
Applying the license code
When the C-Map license code is received this has to be entered
into the CS system before the C-Map charts can be used.
1 Activate the Licenses tab in the C-MAP
Chart Manager
2 Select the database for which you have
ordered charts in the Selected dataset field
3 Enter the code manually (Add manually key)
or by reading it from file (Import from file
key). Follow the instruction on the screen to
complete the installation
4 Repeat the code entry for all databases
If S57/S63 charts are to be imported, this module
is installed under the SW-modules
When the license code is accepted the coverage
zone and the expiry date will be displayed in the
License list field.
To Next Page
Loading...
Need help?
General
