Simrad CS66
34 20221859 / F
When the import process is completed the charts
are ready to be used in the CS66 system
Installing S63 charts
The S63 charts needs a user permit code to be installed on the
CS system. This permit code is unique to your system, and it
is installed when the system is delivered from factory. A
permit code cannot be altered by the user.
If there are 2 chart systems on a vessel the systems might use
the same permit code by exporting/importing the code
between the systems.
The S63 charts will also need a certificate (*.crt file) and
public key (*.pub file). These files identify your chart vendor
as an IMO approved chart vendor. These files will usually be
supplied by the chart vendor, and will typically be located on
the same CD/DVD as the charts. If no public file is supplied, a
signature file may be supplied as part of the chart database.
These file name is identified by a 2 letter country code, and it
has a 3 digits extension, e.g. GBI4011A.001.
If no such files are supplied, the pre-installed information may
be used.
To Next Page
Loading...
Need help?
General
