NAVIGATING WITH THE CS66
20221859 / F 83
Numeric entries of waypoints
If latitude and longitude for waypoint positions are known, these
values may be entered into the Waypoint table in the lower part
of the Route Editor window.
??
1 If the Waypoints table is not visible, toggle it on by
tapping the Route menu followed by the Waypoints
command
2 Make sure that default values for the route are correct
3 Tap the Insert new waypoint key to insert the first
waypoint in the route
− The first row will be inserted in the table, with zero values
in Lat and Lon fields
4 Enter correct latitude and longitude value for the first
waypoint.
5 Continue entering new waypoints by tapping the Insert
new waypoint key. Sequence waypoint numbers will be
given automatically.
The remaining keys on the right side of the waypoint table are
used as follows:
WAYPOINT
TABLE
To Next Page
Loading...
Need help?
General
