Simrad GC80 - Page 79

Simrad GC80/85 Double System Controller
988-12721-001
79
TS-14 - Power failure of the NO.1 gyrocompass communication
system of Double
Procedure and treatment:
1 Check the service switch SW101 and the fuse XF101 in the system.
2 Check the fuse of the NO.1 gyrocompass following the operator
manual of the gyrocompass.
Relevant information:
If an alert or symptom is not fixed, contact SIMRAD service center.
TS-15 - Power failure of the NO.2 gyrocompass communication
system of Double
Procedure and treatment:
3 Check the service switch SW102 and the fuse XF102 in the system.
4 Check the fuse of the NO.2 gyrocompass following the operator
manual of the gyrocompass.
Relevant information:
If an alert or symptom is not fixed, contact SIMRAD service center.
TS-16 - Power failure of the internal communication system of
Double
Procedure and treatment:
1 Check the fuse XF103 in the system.
Relevant information:
If an alert or symptom is not fixed, contact SIMRAD service center.
TS-17 - Power failure of the NO.1 gyrocompass analog system of
Double
Procedure and treatment:
1 Check the condition of the service switch SW101 and the fuse XF101
in the system.
2 Check the fuse of the NO.1 gyrocompass following the operator
manual of the gyrocompass.
Relevant information:
If an alert or symptom is not fixed, contact SIMRAD service center.
TS-18 - Power failure of the NO.2 gyrocompass analog system of
Double
Procedure and treatment:
1 Check the condition of the service switch SW102 and the fuse XF102
in the system.
2 Check the fuse of the NO.2 gyrocompass following the operator
manual of the gyrocompass.