Sindoh M612 - Page 186

180
In the menu select Printe Skew Page(B-Se)(양면) to print on Letter or A4 size paper.
 Magnification
To change the scale,
M611/M616
M612/M617
1. Select Printer service in the diagnostic
mode.
2. Select PRT Registerration
3. Select Magnification
4. Select one of Vertical or Horizontal
5. Set the wanted value by using the arrow
direction keys and press OK.
6. Press [Back] to exit.
1. Select Printer service in the diagnostic
mode.
2. Change the values of vertical or
horizontal of PRT Registerration-
Magnification..
3.When entering negative values, type in
the numbers first and press # key.
4. Press SAVE to exit if all the values
are set .
5. Press EXIT to exit.
The configurable scale range is as below. (1 unit = 0.5%)
Descrip.
Values
V. Mag.
-5 ~ 5 (Default value: 0)
H. Mag.
-5 ~ 5 (Default value: 0)
Adjusting Horizontal Magnification +5 makes the image to
enlarge to the horizontal by 0.5%
Adjusting Horizontal Magnification -5 makes the image to
reduce to the horizontal by 0.5%
Adjusting Vertical Magnification +5 makes the image to enlarge to
the vertical by 0.5%.
Adjusting Vertical Magnification -5 makes the image to reduce to
the vertical by 0.5%