Singer 560 - Page 43

4 3 2
4
~
....
At the end of the east-on row, the yarn tends to be pulled
up by the Tension Spring, and the yarn is hooked by the
needles and the sinker posts irregularly, as shown.
To correct the irregular zigzag yarn, pull down the yarn
from the Tension-Spring toward the Yarn Feeder.
Push the needles by hand one by one in the order from
inner needle to outer needle.
Hint: To eliminate the irregular hooking of the yarn at
the end of the east-on row, pull down the yarn
from the Tension-Spring with your hand before
the Carriage completes the east-on row.
Take out the Ravel Cord from the Accessory Box, and
untie.
Place one end of the Ravel Cord in the yarn clip at the
end of the needle bed, and lay the Cord over the zigzag
yarn between the sinker posts and the needle hooks.
If the Ravel Cord is hooked by the needle hook, the east-
on
will be a failure.
- 39 -