Sirona Dental Systems GmbH 6 Foot control
C3
+
6.1 Wireless foot switch C+
59 06 404 D 3390
D 3390.201.01.18.02
31
3. Press the 0 and S keys of the wireless foot switch
simultaneously for at least 3 seconds.
The signal lamp A on the wireless foot switch
flashes once per second (for 30 seconds) and
the beeper on the NSB board periodically beeps.
4. Within 30 seconds (i.e. while the beeper is
sounding), press the registration button B.
The beeper changes from periodic beeping to a
Morse code sequence and then becomes silent.
The wireless foot switch is now registered.
5. Reinsert the faceplate and reattach the small
bellows at the 4-way foot switch.
Operating the foot switch
Operation of the wireless foot switch C
+
is described in
section "C+ foot switch" on page 35.
To Next Page
Loading...
