13
SKOPE BME-N ActiveCore
Electronic Controller
Service Manual
There are 5 main service mode categories when accessing and using service mode via the
controller faceplate:
Parameters
Allows you to access and edit individual controller parameters.
It is not recommended that parameters are changed unless absolutely necessary. If incorrect
parameter settings are suspected, reload the complete parameter set.
Reset
Returns the controller back to factory settings. The parameter set must be reloaded after
performing a reset.
Manual test
Allows you to see the input values from sensors, check the effects of output adjustments to
peripherals, and run preset test routines.
Statistics
Displays logged values and event counts for diagnostics and fine tuning.
About
Lists the properties of the refrigeration system and the controller, including cabinet model
codes, firmware, hardware and software versions.
SKOPE Connect App
The SKOPE-connect app is designed for end-users and provides wireless access to the
controller from mobile devices with Bluetooth capability.
The app allows end users to adjust some electronic controller
settings including energy saving. modes, open/close hours and
preset temperature set points for specific product
Download from the Google Play Store, or Apple App Store.
Wellington Drive SCS Field App
The Wellington Drive Field app for mobile devices allows technicians to connect and interact
with SKOPE equipment that uses the Wellington Drive SCS Connect electronic controller. The
app allows technicians to:
• View the current state of cabinet components (temperatures, compressor and fan motor
states).
• View a 7-day history of those states.
• Manually change component states.
• Update and change controller parameters.
• Update controller firmware.
Procedure 9: To enable and use service mode via the controller faceplate
1. Press and hold the up and down buttons simultaneously until prompted to enter the 9 digit pin
code.
2. Enter the service mode pin code.
3. Use the up, down, back/abort and next/enter buttons to navigate to the required category.
Apple App
Store
Google Play
Store
To Next Page
Loading...
