Sky-Drones SMARTAP PRO - Flying Transmitter Commands; ARM and DISARM Commands; Sensor Calibration Commands

Modes overview
Transmitter commands
Flying with SmartAP GCS
Flying with RTK GNSS
Geotag images
Logs analysis
Processing the Logs
Transmitter commands
ARM
Hold for 1 second and release
Performs all calibrations before take off and unlock motors. Long beep followed means that the system is ARMED and ready to fly.
Introduction
SmartAP PRO
SmartAP MAX
SmartAP PDB
SmartAP GNSS
SmartLink
Autopilot configuration
Flying
Support
Revision history
SmartAP AutoPilot User’s Guide Transmitter commands
Sky-Drones - SmartAP Flight Control Systems 124 / 151