4. 2x Ground Module antennas
5. Power cable
Description
Air Module
SmartLink Air is based on powerful quad-core ARM Cortex A53 SoC (system-on-chip) computer running Linux. The system is capable of handling
two real time HD video streams from cameras, autopilot telemetry and control. It also has plenty of resources for user applications. Various
interfaces e.g. USB, UART, I2C, SPI allow to connect payload and tightly integrate it with flight controller and / or ground control station.
Ground Module
Ground module is very compact and lightweight, it has micro USB connector to interact with any kind of device - laptops, smartphones, tablets,
desktop computers supported. All you need to do is connect it and open SmartAP GCS App. Ground module features active cooling system
which allows the module to withstand high ambient temperatures making it reliable even in harsh environments. 2x2 MIMO technology provides
higher bandwidth, lower latency and longer range.
Interfaces
Software
SmartLink was specifically designed to be used with SmartAP GCS - powerful cross-platform ground control station. SmartAP GCS supports:
2x HD video streams display
Full camera controls
Video recording on microSD card
Image capture on microSD card
Radio settings configuration
Drone control joystick
To Next Page
Loading...