Sky-Drones SMARTAP PRO - Looking up for Smartlink IP Address

cd "C:\Program Files (x86)\Nmap"
Looking up for SmartLink IP address
Execute IP addresses scan within the required range, in our case it will be:
nmap 192.168.168.*
As the result of this command you'll see IP addresses in this range. You'll have 192.168.168.1 which is as a rule configured as air module,
192.168.168.2 which is usually configured as ground module and 192.168.168.x (x: 0-255) which is IP address for SmartLink. You should use this
IP address - 192.168.168.x for direct connection instead of smartlink.local.
SmartAP AutoPilot User’s Guide Drivers installation
Sky-Drones - SmartAP Flight Control Systems 81 / 151