PWM signals is the top wire, GND is the bottom one.
If you can’t find your airframe in the list above, please, let us know and we’ll add your airframe!
GNSS / MAG
Connect the one side of the cable to GNSS module and the other one to the GPS / MAG port of the autopilot as shown on the pictures below:
Telemetry Module
Connect the one side of the cable to air telemetry module and the other one to the RADIO port of the autopilot as shown on the pictures below:
Power Module
Connect power supply cable (10-36 V, 3S – 8S) from main power distribution board of the UAV.
Electromagnetic sounder
To Next Page
Loading...