Connect two power leads to SmartAP PDB 5V output. SmartAP PDB can be powered from 3S-12S LiPo battery. We power it from laboratory
power supply for this demonstration (15V).
Autopilot
SmartLink system is compatible with any autopilot which has TTL UART telemetry port. For instance, it's compatible with:
SmartAP Autopilot
Pixhawk series Autopilot
APM series Autopilot
other TTL UART telemetry port autopilots
For this demonstration we use SmartAP MAX Autopilot from Sky-Drones:
To Next Page
Loading...
