Skydio X2D INTL - Pre-Flight; Configure Maps

19
Skydio X2D INTL - Operator Manual © 2023 Skydio, Inc. All rights reserved.
Configure Maps
Import custom QGC and Mapbox tiles to the Skydio Enterprise Controller via a USB-C drive or SD memory card
reader.
Import maps
Pre-flight
Step 1 - Load your map files onto a USB-C flash drive or
SD memory card
Step 2 - Insert the USB-C drive or adapter into the
controller
Step 3 - Select the INFO menu
Step 4 - Select Import Maps
Step 5 - Select Select Maps
• navigate to the storage device
• select the maps to import
Step 6 - Select Done
• wait for your maps to import
• select View Map Library to review your imported maps
• If you have uploaded a QGC map, you will also see an
option to open Skydio QGC