33
Skydio X2D INTL - Operator Manual © 2023 Skydio, Inc. All rights reserved.
Before each flight, perform a pre-flight inspection to ensure your Skydio X2D is safe and ready to fly.
3. Inspect battery - Skydio X2D uses magnets to seat the battery that may attract metallic debris. Visually inspect
the battery and connector pins to ensure they are free of debris and damage. Verify the battery is fully seated in
the vehicle prior to takeo.
4. Inspect propellers - Ensure that propellers are firmly attached and free of nicks, cracks, and damage. Do not fly
with damaged propellers. Fan propellers out so that the blades are separated.
5. Clean cameras lenses - use a clean microfiber cloth to ensure that all cameras are dust and smudge-free be-
fore every flight.
6. Inspect motor hubs - ensure that they are free of damage and debris.
5
6
6
4
2
3
1
Inspection
Pre-flight
1. Inspect chassis - inspect the vehicle chassis to ensure it is free of damage.
2. Inspect motor arms - verify that they are free of damage and assembled properly. When assembled and
viewing the drone head-on, arms should be parallel to the chassis.
To Next Page
Loading...
