3-9
Note:
1. The system will
automatically perform the
test sequence when the
drawer contains a reagent
disc and is closed.
2. If the clinical chemistry
analyzer’s system settings
include the calculation of
eGFR values, please
answer the questions on the
system prompt screen in
sequence, including
information such as
“gender” and “age”.
When the Operator Control setting is ON
, the
system will require the operator to enter the Operator
ID before the test starts.
Use the touchscreen to enter the p
numbers) or scan the patient ID using the
external barcode scanner and press OK.
If you press OK without entering a patient ID, the
system will use the current date
ID in the format ddmmyyyyhhmm.
If you enable the eGFR o
prompt you to enter Gender and Age. Press OK
when you finish.
Select Gender
Enter the patient’s age
To Next Page
Loading...