A-2
1. INTRODUCTION
This RS232 Communication Protocol Specification describes the communication format
& protocol information for data exchanges between the skyla
TM
Clinical Chemistry
Analyzer and external computer (e.g., PC) through the RS232 interface. The baud rate of
RS232 data transmissions can be set to 4800, 9600, 19200, 38400, 57600 and 115200
bps and the configuration is N-8-1. (N: no parity, 8: eight data bits, 1: one stop bit).
Please operate the skyla
TM
Clinical Chemistry Analyzer’s GUI to set the baud rate.
To Next Page
Loading...