Skyla HB1 - Section 2: Setup and Quick Start; Pre-Installation Check

2-1
Package Checklist

Clinical chemistry analyzer

Power adapter & power
supply cord

One roll of thermal printer
paper

200 μL micropipette

One box of pipette tips
(96 tips)

Operator’s manual
 Quick guide of operation

Quick guide of error code

Warranty card

External barcode scanner
and stand (optional)

USB-to-RS232 connection
cord (optional)
Section 2: Setup and Quick Start
2.1 Pre-installation Check
1.
Remove the skyla
TM
Clinical Chemistry Analyzer
from the shipping box
. Place the analyzer on a clean
surface off the floor. Do not expose the analyzer to
direct sunlight or any heat source.
2.
Please refer to the checklist on the
left and check that
the components and other peripherals received with
the analyzer are present.
Checklist
No.
Item
Picture of Item
1
Clinical Chemistry analyzer
2
Power adapter & power
supply cord
3
Roll of thermal printer paper
4
200 μL micropipette
5
One box of pipette tips (96
tips)
6
Operator’s manual
7
Quick guide of operation
8
Quick guide of error code
9
Warranty card