Skyla HB1 - Page 55

5-8

The procedure for changing the reference range of an
analyte is as follows:
1.
Use the up and down arrow keys
to
increase or decrease the reference
range shown.
Select “OK” to save the changes.
2.
To cancel the changes and return to the old
settings, please press the Return icon.
3.
The administrator can also directly select the value
to change.
The new value can then be entered using
the keypad.
4.
If the reference values vary due to gender, select
gender first before changing the setting values.
5. Press the icon to return to the previous step
or Home.