Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
Remark: ▲ This item can be edited only in "Normal Splice Mode".
4.5 Tension test
4.5.1 If the operator wants to test the strength of the splice point, enter the window
of [select splice parameter files" in splice mode and enter "edit splice parameter
document”window. Click the cursor mouse to select "tension test" function "On"
option. Press button to confirm that the setting is valid, then exit the
readiness window.
4.5.2 After the machine finishes the normal connection, the splice loss estimate
value is displayed. The operator presses the button "continue" at the lower
portion of the display screen and press button. The fusion splicer will
preform automatically the tension test of the fiber.
4.5.3 When the fiber splice point is not broken during the tension test, it will show
"tension test is completed."
Some arc parameters
inappropriate.
▲Adjust "fiber pre-melting intensity",
"Fiber pre-melting time".
▲Or adjust "overlap".
To Next Page
Loading...