SKYSHL SS413F Series - Heating Operation; High Lever Settings; Appendix A Warranty Period and Conditions

121
Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
6.3 Heating operation
Heat shrink sleeve is not completely shrink.
Prolong heat time or increase temperature. See [heater mode] (Section) 3.3).
The reinforcing core of the heat shrink sleeve is not placed on the bottom.
Optical fiber is not distorted. See [heater operation] (Section 4.7.3).
The heat-shrink sleeve after shrinking is stuck to the heating groove.
Eliminate it with a cotton swab or other soft material.
Automatic heating function does not work.
After the transparent window of the heater is closed, the right press plate of
the heater can not effectively hold down the optical fiber (or fiber-optic breaks
by pressing). See [heater operation] (Section 4.7.3).
Cancel heating operation

Press button one time.
6.4 High lever setting
"Select" and "Edit" in lock splice and and heater modes
See [Menu Lock] (Section 3.7.6).
Appendix A: Warranty period and conditions
The warranty period of the fusion splicer is:
Optical fiber fusion splicer host:2 years; Fusion splicer display: 1 year;
Power adapter: 1 year; Lithium battery charger: 1 year;
Fusion splicer battery: 6 months.