Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer Userās Manual
V
The leaking electrolyte has certain corrosion. Once leakage occurs, do not
touch it directly with hand. If the battery fluid gets into your eyes, rinse
immediately the eyes with clean water. Do not rub the eyes. Go quickly to the
hospital for treatment. When the electrolyte leakage is found, take out the
battery quickly from the machine, so as to eliminate safety risks and avoid also
the machine corrosion.
<8>The battery should be placed away from children.
The identification and control ability of the child is poor. The battery should be
placed outside the child's reach to avoid accidents.
2.4 Power-saving mode operation
To save unnecessary consumption of battery power, the fusion splicer can be
set to enter the power saving mode or shutdown mode when the fusion splicer
is not operated within a certain period of time. See [Settings] power save menu
(Section 3.7).
2.5 Under voltage alarm (battery-powered)
This model fusion splicer has "low voltage alarm" function. When the
lithium battery (group) power is below a certain value (this value is set at
the factory and is about 10.3V), the fusion splicer screen will show "low
battery!!!" warning window as shown below. Top right corner of the screen
has battery under voltage icon and buzzer alarms automatically. At this
point, the user should promptly use the power adapter or charge the lithium
To Next Page
Loading...