Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
on the screen.
<6> Upon completion of respective 2 image dust check and passing, press
button in turn to return back to the fusion splicing window. The normal optical
fiber splicing work can be done.
5.9 Maintenance of cutter
5.9.1 Cleaning fiber cutter
<1> Keep clean the fiber clamp surface of the cutter. Do not touch oily liquid.
<2> Clean with a thin cotton swab dipped with alcohol the blade and pressing pad.
<3> After each use, it is to be noted that the rubber press pad shall be free of any
residual broken fiber or other debris. The cutter after cleaning shall be put into a
● If the screen displays "image dirty" after the dust check,the
operator shall clean the objective lens and mirror inside the
wind cover. If after cleaning and doing "Dust check" again,
but the dirt remains, it indicates that the dirt may go into the
optical path. Please contact the manufacturer or dealer.
To Next Page
Loading...