SKYSHL SS413F Series - Maintenance] Operation

58
Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
Max. number of
Re-arc
Additional arc sometimes improves splice loss, but
sometimes becomes worse. Multiple re-arcs may reduce the
splice strength. This function can limit the number of
re-arcs.
Reset after splice
After the fiber is spliced and the loss estimate is displayed,
open the wind cover, but the machine is not reset. Press
button to reset.
"2s": After the fiber is spliced and the loss estimate is
displayed, open the wind cover, the machine is reset
automatically after 2S delay.
"0-120s": Delay time for the splicer automatic reset.
Second cleaning
discharge
This function is mainly applied to "red light online fiber
splicing operation", ensures more clean on the fiber end
processed.
Real-time revise
SS413F optical fiber splicer has this function and is set at
the factory.
3.6 [Maintenance] operation
[maintenance] window provides a number of important product maintenance
options. In the readiness window as shown in following figure. Move the cursor to
[maintenance] window and click button to come into "maintenance" window.
The important product maintenance options can be set.