SKYSHL SS413F Series - Product Specifications

2
Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
1.1 Product specifications
Applicable optical
fibers
SM (G.652 & G.657), MM (G.651), DS (G.653),
NZDS (G.655) and user-defined optical fibers
Splice loss
0.02 dB (SM), 0.01 dB (MM), 0.04 dB (DS/NZDS)
Return loss
Better than 60dB
Control technology
Real time splice arc control and correction; Self adaptive in
working environment scope; Electrode oxidation self
adaptive.
Splicing time
<9 seconds (standard SM).
Heat time
<25 seconds (The Heat time can be set and the heater
temperature can be adjusted.); Fast heat function, functions of
automatic or manual heating selection.
Splicing function
Step-by-step splicing or automatic splicing optional
Fiber alignment
Fine alignment, fiber core alignment, cladalignment, manual
alignment
Fiber diameter
Cladding diameter 80~150μm,coating diameter 100~1000μm
Cleave length
Coating less than 250μm: 5 ~ 16 mm;
Coating 250 ~ 1000μm: 16 mm.
Tension test
Standard 2N (optional)
Fiber clamp
Multifunctional clamp is applicable to bare fiber, tail fiber,
jumper, covered fiber and stealth fiber. The clamp meets the
requirement of industry standard FTTH fusion quick splicer.