SKYSHL SS413F Series - Startup and Shutdown; Display Brightness Adjustment

20
Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
battery, or hold down button to turn off the fusion splicer. Otherwise,
it will shut down automatically after about 30 seconds.
Remarks: Top right corner of screen : (Simultaneously) displaying the
battery under voltage alarm.
2.6 Startup and shutdown
Starting up:
Hold down button. When the LED indicator on the keypad is changed to
green, release button. After all motors are back to the initial position, the
fusion splicer shows "readiness" screen. The starting up operation is complete.
Shutdown:
Hold down button. After the LED indicator on the keypad is changed from
green to red, release button. The splicer completes the normal soft
shutdown.
2.7 Display brightness adjustment
On the one hand, the display brightness determines power consumption, on the
other