SKYSHL SS413F Series - Data Display

53
Shenzhen Skyshl Technology Co.,LTD.
Sales email: sales1@skyshl.net After Sales email:af@skyshl.net Website:www.skyshl.net
SS413F Optical Fiber Fusion Splicer User’s Manual
V
Auto start
Setting "On": The fiber will be spliced automatically when
the wind cover is closed, the operator is required to prepare
the fiber in advance and put it into the machine.
Setting "Off": The window "click button for start"
appears automatically when the wind cover is closed.
Pause 1
If "Pause 1" is set to be "On", the fiber splicing process will
stop when the fiber is pushed to the gap setting value. The
operator can see the value of Cleave angle at the same time.
Pause 2
If "Pause 2" is set to "On", the fiber splicing process will stop
when the fiber alignment is finished. The operator can see the
offset of the fiber core and the offset of the cladding at the
same time.
3.5.2 Data Display:
Parameter Description Table: